BMW E36 Bolt In Hydraulic Handbrake / Fly Off
Designed to modify drift handbrake extension that fits over a stock parking brake handle
on a BMW E36 (left-hand drive EU and US models)
This item is a simple solution to getting more out of your factory e-brake system.
Easy to install, and it puts the handle in an easy to reach position.
Handbrake mounted on the original holes in the tunnel.
The original handbrake cover can be slipped over the Fly Off.
The handle can be extended with an additional tube if necessary.
Master Cylinder OBP:
– size 0.625 (15.86 mm)
– input 3/8 “UNF
– output 7/16″ UNF
In order to correctly connect the handbrake, two additional brake calipers are required on the
rear axle, then the line to the hydraulic handbrake is pulled from the brake caliper and connected there.
A hose with a container for the brake fluid is attached to the second connection or copper fitting.
ATTENTION! The brake does not have a latch, during assembly in some versions of
the equipment you may need a slight undercutting of the internal plastics in the tunnel.
This does not affect the appearance of the tunnel from the outside.
Worldwide Shipping Available
Contact Us for Quote
e-mail: [email protected]
web: www.born2drift.co.uk/contact-us