STEERING ANGLE LOCK KIT With Hubs
70° lock angle
Complete “plug & play” kit with lower arms, tie-rods and ends,
top mounts, steering knuckles, hubs and bearings.
Excellent quality and great performance make this Kit perfectly suited
to intensive use on the track and in competition.
All models require the use of coilovers with a lower mount from model E36.
Complete “plug & play” kit for BMW E36
70° lock angle
Zero Ackerman effect
Reduces bump steer
35 mm of roll centre correction
Adjustable lock limiters
Requires non-M brakes, either from E36 or E46 (for better clearance)
Knuckles have been manufactured to raise the roll center
back to its stock position on lowered vehicles,
for perfect alignment and absolute control, even at
steering lock limit where the wheels are perfectly aligned and parallel
(zero Ackerman effect and reduced bump steer).
Note: kits for each chassis model differ in dimensions and cannot be used interchangeably.
Perfect Fitment Hack:
Installation of the Steering Lock Kit widens your tracks by approximately 35mm per side.
(This measurement is observed in 99% of cases and on vehicles in 100% original configuration before assembly.)
– Ideally if you will use: Wheel size 17×7.5 ET30, tires maximum 225/40 R17.
Hubs and bearings
Meyle tie-rod ends (BMW Motorsport OEM)
Aviation quality aluminium top mount relocators
Required bolts and accessories
Optimal “DRIFT” suspension settings:
Camber: -1 degree
Caster: 4 degrees
Toe: optimal 0/0 or toe out 15′ to 30′ for better front axle dynamics